Comparison Reviews Forum Support Quotes & info Contacts

XG10 DKN assembly instructions

Assembly sequence of the XG10 vibration training Plate. Step by step instructions and suggestions by vibrationtrainingPlate.com

2008©copyrightXG10 in-depth reviewquotation XG10

[ in-depth review appendix by Marvin Sasha - 5th November 2008 ]

2008©vibrationtraining.com newplanet srl - All rights reserved.

XG10 assembly

XG10 packaging XG10 open column box

XG10 comes in two boxes: base and accessories weight 58kg 128lbs. Central column 13kg 29lbs. Both can be turned upside down, pulled roughly that nothin happen. Very good packaging.

XG10 put the column on the ground XG10 take out handlebar and manuals

Open the column box, take it out an put on the ground. Open the other box and pull out the handlebar and manuals.

XG10 pull out base XG10 components

Remove the polystyrene foam. To pull out the base you have to be in two. Ask for help to your neighbor. 50kg or 110lbs are a heavy load. Watch your back. In the right image there's all you get in the boxes.

XG10 prepare screws XG10 stabilizer screws

Prepare the screws as in the image above. The other 3 screws in the plastic bag are for the stabilizer you will fix later.

XG10 position the column XG10 fasten base screws

Put gently the column on the base. Screw the screws.

XG10 plug in connectors XG10 fasten connectors

Plug in manually the connectors. Best if you plug the connectors before to fix the screws. Connectors are not properly easy but you shoul do it after few attempts. Just turn them until they go in.

XG10 lift and fasten screw XG10 prepare screws

Lift the back side of the platform and put something solid below. Screw firmly. Then, prepare the screws for the handlebar and the control unit.

XG10 place handlebar fasten handlebar screws

Place the handlebar and fix it with the four big screws.

XG10 connect cables

Connect the cables and connect the mass cable tho the column. 3 cables to connect.

XG10 insert unit XG10 fasten screws

Insert the control unit over the column and fix the screws with a screwdriver (doesn't come with the XG10) and be careful to not fasten too strong for the panel is in plastic.

XG10 bend XG10 fix stabilizer

Bend the XG10 to one side as in the image above and fix the stabilizer with the 3 screws.

XG10 remove film 1 XG10 remove film 2

Remove all the protection films.

XG10 remove film 3 XG10 remove film 4

XG10 remove the box XG10 box removed

Now you can remove the orange box. Plug the electricity an power on the XG10 to try if everything works.

XG10 assembled  

XG 10
DKN

price
3995,00 USD
2290,00 €

ask quotation



share

^ top


home <<

in depth reviews

G Force test, acceleration, EMG electromiografy, noise, opinions and exclusive details of the major vibration training Plates.

Scientific Research

pubblications

All the affirmations in this site are taken from the scientific reserch collected in our research section.

Forum

on-line discussions

Share the knowledge, support to the end user!

Info and quotes

ask a suggestion

Actually the purchase of a Vibration Training Device is driven by the marketing and advertising. Don't buy the wrong device. We make tests and investigate for the pros and cons. Ask us first.

Beware fake Plates!

for beauty farms

DO NOT PURCHASE ANY DEVICE IF YOU NEVER TRY AT LEAST ONE OF THE FOLLOWING APPROVED Plates:

• GALILEO FITNESS
• MAXUVIBE MX7
• VIBROGYM
• POWERPLATE
• DKN XG10

THERE ARE MANY FAKE VIBRATION TRAINING Plates.

PLEASE ASK FOR A FREE SUGGESTION, THEN FEEL FREE TO BUY WHAT YOU LIKE MOST.

Fake Plates.

We are aware of many dealers selling Plates with very low performance, under the vibration training threshold at a scandalous professional price range.


home | Comparisons| Reviews| Forum | Quotes & info | Contacts

2008©vibrationtrainingPlate.com by newplanet.it srl p.iva IT02164640308
All rights reserved. All images on this site are made and shot by our team and are of sole property of the authors. No reproduction or copy allowed without written permission.